Dc25 Putting the Switch Back Together Again

The World'due south #1 Vacuum Cleaner Advice, Repair, Give-and-take & Information Forum

  • Print

Topic: DC25 putting the switch dorsum together again  (Read 37629 times)

Hi all i purchased a used Dyson from a friend for �20.00 a few weeks ago at present. I would like to think I'm fairly expert at taking things apart and then brought it every bit a project,the machine turned on but i later found that the caput assembly unit need replaced as the belt had burnt the housing it was cased in and information technology was well smashed up in the sole plate, i purchased a new assembly unit and fitted it today, and to my dispair information technology yet refuses to spin! :'(
i figured it must be the castor bar on off switch or the reset switch, Taking autonomously the switch unit i institute the probelm to be the reset switch as it was burnt out within,

to test this i joined the 2 wires up that was going to the reset switch and constitute it to work great :grinn:

My worry is now getting it all dorsum together again when i take ordered the new switch, i accept 2 springs I'yard not sure  i lost one does anyone know how many springs there should be in the switch unit ?

Also does anyone have a diagram or better still a video showing how to go the switch dorsum together once more

I kept the motor that spins the brush and this works well still i sympathise that its a role that can not be purchased is there a for auction page here ?

thanks for any advice

IM Sure THIS SPRING Cant BE IMPORTANT


is in that location a for sale page here ?

Many people send their spare stuff up to us and get a Paypal or a bank deposit in return. We can always use those. Send Claire or me a PM.

I am not aware of whatsoever videos out there yet for that aspect of the DC25, did yous get a new reset switch already? Nosotros tin get you one if not (I call back we have some actually) They are not dear....

Someone will likely put you lot a couple of photos up if yous are struggling. We don't accept a DC25 in $.25 here right now or we would. I am certain we will accept one in during the next few days though.

More to the signal, if your mate has whatever more DC25's @ �20, nosotros'll have 50 of them! ;D


these 2 pics should articulate up where the the springs go.....you may need to "hold up" the switch buttons equally you re-assemble - likewise fit rollerbrush button first!
ila_rendered ila_rendered

I have no rollerbrush spinning - reset sw is fine (checked continuity) motor not spinning in brush housing - have looked at it/smelt information technology - it seems fine....need to bank check ability/upright sw....

Hope I've helped?

Mark

Update - establish the problem in the uprightswitch housing - just sharing this in instance information technology helps someone!
ila_rendered


Thanks so much for posting that photograph of the Dyson DC25 switch apparatus. That sprig and rocker arm flew out when I took mines apart and I couldn't figure it out until I saw the photo you posted. Thanks!!!! :thumbsup:


Thanks so much for the pictures of how to put the switch assembly back together once again. I had no idea that the second spring fit on the brusharm. I don't call back I would take always known without your pictures. Thank you again!




Trade Dyson Spare Parts

Dyson Spare Parts

Freestanding Dyson Cordless Vacuum Stand

Buy a Dyson DC04 Wand Handle

Buy a police truncheon

Instagram

Dyson Spares, Parts, Advice���Follow us on Twitter

Manchester Vacs on Instagram

waltontheins.blogspot.com

Source: https://manchestervacs.co.uk/DysonForum/index.php?topic=564.0

0 Response to "Dc25 Putting the Switch Back Together Again"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel